garmin apollo gx60 gps, comm, IFR "cheap alternative for GTN, GNS 430 530" -

garmin apollo gx60 gps, comm, IFR "cheap alternative for GTN, GNS 430 530"

Click here to purchase or contact the seller of this item on eBay

Current Price: 2,499.00 USD

This unit was purchased brand new from Lancair. This unit was installed in the aircraft but the plane was never finished leaving me with some NEVER FLOWN high end avionics. Tray and connectors are included. If you have any questions please feel free to call me at six 6 one 4 zero 0 5 five 56. Thank you for looking and God bless...

The GX60 is an advanced navigation and communication solution in a single two inch package. No other GPS/Comm can deliver the transmit power, the high definition moving map display, the TSO certified navigation and the communication performance of the GX60. The Apollo GX60 is an approach certified GPS receiver loaded with features including a high definition moving map display on a large sun light viewable screen. The aircraft's position relative to airports, runways, VORs, NDBs, intersections, and SUAs can be easily viewed on the large moving map display. Operation is streamlined and pilot workload reduced through the use of Smart Keys. Airspaces and navaids can be added or deleted from the map with a single press of a button. The GX60 is TSO-C129a Class A1 approved for IFR non- precision approach operation.

The II Morrow / Garmin AT Apollo GX-60 offers all the capability of the GX-50 IFR Approach certified GPS, but it also adds a very sophisticated COMM transceiver.

The COMM section in the GX-60 is a 760 channel radio with active / standby flip-flop. It is possible to listen to the standby frequency while the radio monitors the active frequency for any activity. This is almost like having two separate radios, because you can gather additional information on another frequency while making sure you are not missing a transmission.

The COMM transceiver in the GX-60 offers a very respectable 8 watts minimum output (more than a KX-170B, for example). Many GPS/COMM radios are less powerful than a dedicated COMM or the COMM section of a NAV/COMM, but that is not the case with the GX-60.

The GX-60 operates with 14-28 volts input. The COMM section of a GPS/COMM often restricts the whole radio to 14 volt operation (or requires the use of a voltage converter). The GX-60 avoids the cost, heat, weight, complexity, and potential failure point of a voltage converter in a 28 volt aircraft.

Additional COMM features include:

Transmit indication
Stuck microphone timeout (35 seconds)
National Weather Service channels
Internal two-place voice activated intercom
Frequency memory - from GPS database, last 10 used, user storage, weather, and emergency (121.50 MHz)
Two microphone inputs
12 watt audio amplifier for cabin speaker

Regarding its GPS features, the Apollo GX-60 offers an IFR non-precision approach certified GPS Receiver loaded with features, including a high-definition moving map display on a large sunlight viewable screen. The aircraft's position relative to airports, runways, VORs, NDBs, intersections, and special use airspace can be easily seen on the moving map. Operation is streamlined and pilot workload reduced through the use of Smart Keys and an intuitive interface. Airspace and navaids can be added or deleted from the map with a single press of the button.

The Apollo GX-60 features:

Bright, clear electroluminescent display - This display measures 160 pixels wide by 80 pixels high, and its brightness is controlled automatically to match lighting conditions. This display can be set up to show a moving map, navigation information, and a graphical CDI.

Moving Map graphics - The map shows your aircraft's position relative to surrounding database items. This map may be configured to use the full screen, or only part of it. In Full-screen mode, most of the display will show the map, but the corners are used to show the TO waypoint, bearing, distance, and map scale. In Split-screen mode, the display will also show ground speed, track, and cross track error. The map may be oriented with track up, desired track up, or magnetic north up. Map objects may be selected for information or "Direct To" navigation.

Ease of use - The GX-60 uses Smart Keys to put the most commonly used features for a given operation right in front of the pilot. The Smart Key buttons are labeled right on the display. This makes it easy to access the GX-60's power, without crowding the faceplate with buttons. Simple navigation is available right away with the "Direct To" function. There is built-in simulation software for learning the rest of the features when you are safely on the ground, and can devote your full attention to training.

Pilot-focused design - It is clear that this GPS was designed by pilots. A full complement of E-6B calculations are available. The GX-60 can receive altitude from encoder, and it knows the minimum safe altitude and enroute safe altitude for your flight. The navigation pages are user definable and have auto sequencing. The pilot may store up to 30 flight plans of 20 legs each, and these flights are flown with automatic waypoint sequencing. Up to 500 pilot defined waypoints may be added to the database. Automatic magnetic variation is based on your current position. The navigation computer has the ability to set up a parallel track offset. This unit also has both a countdown timer and a flight timer.

Peace of mind - An Emergency Search function quickly displays the 20 nearest airports (other waypoint types are available as well). Even better, the pilot may set search criteria based on runway length, surface, and lighting. With search criteria, time isn't spent deciding about airports that can't be used. The GX-60 may also perform this search around any waypoint. This is useful to know what other airports are available near your destination.

Datacard database - The GX-60 database stores comprehensive airport and navaid information. These database cards are front loading, which makes it much easier to keep the data up-to-date.

Compatibility - The Apollo GX-60 may be interfaced with an HSI, CDI, Autopilot, Blind Encoder, Fuel Sensor, and external Moving Maps. Two RS-232 ports are provided.

Click here to purchase or contact the seller of this item on eBay