David Clark DC-COM Model 200 Aircraft Intercom with PTT Switch and audio cablesClick here to purchase or contact the seller of this item on eBay |
|
|
| Current Price: 150.00 USD |
David Clark DC-COM Model 200 Aircraft Intercom, used, in EXCELLENT condition.
Included:
- David Clark DC-COM Model 200 Aircraft Intercom
- David Clark Portable Push To Talk Switch Model C10-15
- 2 x 3.5 inch audio cables for AUX OUT and AUX IN
- 2 x 9 volt batteries
Features:
·
·
Superior
Squelch
·
Individual
VOX
·
Expandable
·
Power
on-off/Fail Safe Switch The smooth operating toggle switch placed
in the on position provides power from selected power source (external or
battery).Toggle to aft position removes power from intercom and provides fail
safe operation by routing transmit and receive audio directly to headset.
·
Battery
Select Switch is used when indicator light pulsates red
to signal low battery - After switching to new battery indicator light will
return to pulsating green. Low battery should be replaced as soon as possible.
·
Power/Battery
Indicator Light illuminates constant green when using
external power operation. Pulsating green for internal battery operation and
pulsating red for low internal battery.
·
Pilot
and Co-pilot Jacks will accept the standard plugs (PJ-055
headset and PJ-068 microphone) from any general aviation headset and the
microphone plug from a portable P44 Switch like DCC Model C10-15.
·
A Front Panel Push-To-Talk Button is provided for pilot transmissions
when a yoke mounted PU or a portable PU Switch is not used.
·
Volume
Control Knob for setting system volume level.
Individual's headset level can be set with headset volume controls.
·
Squelch
Control Knob for setting VOX threshold for voice
activation of intercom for pilot and copilot positions. VOX threshold for
passengers is set from Model 2OOEX Expansion Module (not included).
·
Auxiliary
Input Jack will accept signals from devices such as portable CD and tape
players. Aux in will mute with radio reception.
·
Auxiliary
Output Jack will provide line level signal for driving CVRs, tape recorders or
other such devices.
·
External
Power Input Jack will accept plug from power cord supplied
for use with external power.
·
Expansion
Jack will
accept the plug of the extension cord supplied with Model 200EX Expansion
Module (not included) to expand the system to a four place and six place
system.
·
Battery
Powered by one of two available batteries. When one battery begins to
drain (after approx. 40 hrs.) simply switch to second battery using battery
select switch for an additional 40 hrs. of intercom use.
·
Battery
Cover Plate is easily removed for replacing batteries by simply unscrewing the
thumb nut and replacing the batteries.
|
|
|
|
|
|
|
Click here to purchase or contact the seller of this item on eBay