Bendix/King KR-87 Complete ADF System w/ KA-44B Antenna & KI-227 Indicator x8548 -

Bendix/King KR-87 Complete ADF System w/ KA-44B Antenna & KI-227 Indicator x8548

Click here to purchase or contact the seller of this item on eBay

Current Price: 1,195.00 USD

Authorized Dealer - FAA Approved Repair Facility - 90 Day Warranty - 30 Day Return - Free Shipping - In Business Since 1984

Description: You are buying a used Bendix King KR-87 066-1072-00 Complete ADF System w/ KA-44B Antenna 071-1234-00 & KI-227 Indicator 066-3063-01 x8548

Accessories: Everything you see in the pictures *If not mentioned or pictured in the description the item is not included

Physical Condition: Please view pictures of the actual item for details on condition

Working Condition: Tested working. Aligned and adjusted per Manufacturers Specs. Unit operations check good. See 8130 for details

Features

Digitally tuned solid state automatic direction finder which provides bearing information to stations in the frequency range of 200 KHz to 1799 KHz and which also provides audio reception to enable pilot to identify stations
Used with KA-44B combined loop/sense low profile ADF antenna OR KA-44 blade antenna
Can be used with single needle KI-227 ADF indicator or dual needle KI-228 indicator (both indiactors available with manual or slaved compass cards)
It is possible to add capability to the KR-87 which enables it to drive two (2) KI-227 ADF Indicators:
Unit Must Include Service Bulletin 6 for added capability
Note: for 28V aircraft only
May be interfaced to King KI-229 or KNI-582 RMIs
Can be interfaced with other 3-wire RMI indicators by way of KDA-692 RMI adapter
Models available with single or dual indicator driving capability (see table below)
Models available with ADF Superflag output for use with EFIS systems (see table below)
Internal timer for flight time and elapsed time which proves valuable for non-precision timed approaches, fuel management, dead reckoning navigation
Automatic dimming circuit adjusts the brightness of the display to compensate for changes in the ambient light level
Coherent detection design rejects unwanted frequency interference, achieves significantly greater range and has less suspectiblility to engine noise, static and atmospheric interference
Flip-flop frequency display allows to switch between pre-selected "standby" and "active" frequencies
Operates on any voltage from 11-33 VDC with 12 watts power consumption
Models available for 28 volt use only (see table below)
Models available with 5 volt display lamps (see table below)
Models available with standard or shiny display lens (see table below)
Models available with clear or blue display light (see table below)
Models available with backlit nomenclature (see table below)
Forced air cooling not required
TSO'd

Click here to purchase or contact the seller of this item on eBay