I Have Sold 2400 One Man Brake Bleeders Now With 5/16”x3/8” Brake Bleeder WrenchClick here to purchase or contact the seller of this item on eBay |
|
|
| Current Price: 23.85 USD |
We Are The #1 Seller on eBay of this Oil Can Style One Man Brake Bleeder
With Over 2400 Sold by us here at Wayne's Wings where Honesty and Integrity is our Motto
We recommend that you visit our small eBay where we have about 30 combinations of tools and supplies
so that you can get the right tools to bleed your brakes.
We are the first seller on eBay to offer you a syringe with your One Man Brake Bleeder
to remove the old brake fluid from the master cylinder.
We are also the first on eBay to offer a professional 5/16"x3/8" offset brake bleeder wrench
with your One Man Brake Bleeder that is made specifically for bleeding brakes.
Plus we offer different makes of Bleeder caps and a Craftsman wrench
View our and compare our prices as we sell these added items to you at cost plus shipping.
We do not inflate the price as some would and then advertise it as FREE!
Included with this One Man Brake Bleeder is a
6 point 5/16”x3/8” Box End Offset Brake Bleeder Wrench 9-3/4" long
We are selling you a Performance Tool 5/16”x3/8” 6 point offset brake bleeder wrench that was designed just for this purpose,
because most 12 point wrenches will round off a brake bleeder valve causing a very expensive repair.
This One Man Brake Bleeder eliminates the need to have a second person pump the brake pedal.
It is not a vacuum pump! It is a pressure pump that pushes the brake fluid in reverse of traditional brake bleeders.
Reverse Brake Bleeding is unlike traditional brake bleeding, Because like the "old days" with this system you pump brake fluid into the brake bleeder screw back to the master cylinder and the new fluid pushes out all the old brake fluid and air bubbles.
No need for special tools, adapters, electricity, batteries or air compressors “Just hand power”.
This modified oil can style One Man Brake Bleeder comes with 12 inches of tubing commonly used in fuel applications. We pay more for it because we believe in supplying you with the best products available.
It is flexible and has a wide range of temperature resistance.
We are the only seller that sends you a One Man Brake Bleeder with the tubing already installed and clamped on the nozzle with a Helix clamp to be screwed on the pump to service or back bleed your brake system.
In the picture you can see the inner portion of the brake bleeder.The lower portion of the internal pickup tube has a snap on filter that can be removed for cleaning.
When injecting brake fluid into your system do not let the fluid get lower then it, allowing it to pick up any air.
Please note that you must screw the yellow nozzle onto the pump head (be careful not to cross thread it)
Do not use water to clean this unit as it will craze the plastic.
There is a pressure adjusting screw on top of the unit that normally does not need to be adjusted.
This high pressure brake bleeder will bleed and flush most Small Aircraft, Cars, Trucks, Motorcycles, SUV's, Recreational Vehicles and Heavy Equipment.
If you have a soft or spongy brake pedal, this will usually solve the problem.
Plastic cup is clear and holds 9oz so you can always see your remaining fluid level.
Please insure that your bleeder screw on your caliper or wheel cylinder is clean and free of internal dirt before injecting brake fluid into it.
Instructions
It is simple to use this One Man Brake Bleeder.
After removing most of fluid from the master cylinder with a syringe.
Attach the nozzle to the One Man Brake Bleeder. (be careful not to cross thread it).
Fill the plastic cup with clean brake fluid
Purge all the air out of the hose by pumping the unit while holding the hose up.
Always start with the wheel farthest from your master cylinder doing each wheel individually.
Attach the hose end by pressing it onto the bleeder screw on your caliper or wheel cylinder.
((Also works with Clutch cylinders))
Open your bleeder screw and inject clean brake fluid into your caliper or wheel cylinder.
Any trapped air is pushed up and out through your master cylinder.
Close bleeder screw and Top off the master cylinder and replace the cover.
Your brakes are bled.
Here is a picture showing the tubing pushed on a bleeder screw, notice the snug fit!
This sale does not include the bleeder screw
I try to describe items the best I can. Please look at the pictures close and ask any questions before buying.
It is impossible to address issues if we do not know about them! I want us both to be happy with the transaction.
This brake bleeder is not recommended for vehicles with ABS brakes as they have a high pressure proportioning valve that takes special equipment to bleed through it.
Some people have tried with our One Man Brake Bleeder and was able to have success, but we cannot guarantee it.
Customer satisfaction is our #1 priority.
If you are not satisfied with your purchase, please contact us before you leave feedback so that we can rectify the issue accordingly.
This is an email that I received on 10/25/2012 Dear wayneswings, I've got a 94 Ford Ranger (bought new) that has had a "slug" of air in the clutch line for over 10 years that I couldn't get out by regular bleeding (after I replaced the clutch). The reverse bleeder came today and it took less than 1 hour to solve a problem that I've worked countless hours (and money) to solve, to no avail. Thank you for a fine product at a reasonable price! – joekiess
Jandmexhaust Left the following feedback
((Best tool I have ever purchased, full pedal on first use wish I'd got one sooner!)).We will leave POSITIVE feedback for you when your item is shipped.
We take pride in the products we sell and hope you will continue to purchase from us in the future.
View my to find the best deal for yourself with more Brake Bleeders and tool combinations to make the job simpler
International customers please keep in mind we have no control over shipping time once we take your package to the post office.
Once we print the shipping label your tracking number can then be found in your eBay purchase history.
We no longer sell the Metal One Man Brake Bleeder as we found them to have about a 25% failure rate. This was caused by the plastic pickup tube not sealing where it went into the metal head and caused the pump to create air bubbles which is fine for an oil can, but not a brake bleeder. We exchanged several of them for these plastic ones at no cost to our customers.
We stand behind what we sell
I have personally sold over 2400 of these units to many satisfied customers here on eBay.
Save hundreds of $$$ and do it yourself
Thank you to all those who have left me positive feedback.
To date I have left over 4200 positives for all my customers.
All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
|
|
|
Click here to purchase or contact the seller of this item on eBay