Cleveland Aircraft C Frame Bench Dimpling ToolClick here to purchase or contact the seller of this item on eBay |
|
|
| Current Price: 150.00 USD |
C-Frame Bench Dimpling Tool
Cleaveland Aircraft Tool's C-Frame is a combination of the best features of several tools! It can be used for both dimpling and setting rivets. Its thoughtful design assures perpendicular placement of dimple dies and rivet sets to the skin's surface.
When to use the C-FRAME TOOL
For dimpling of all control surfaces and internal areas of aluminum sheets
For riveting stiffeners and hinge fittings to the wing and empennage spars, as well as other sub-assemblies
Features include:
Base with a floating socket that protects against shearing of dimple die pilots; socket accepts .401" standard shank tools, same as a rivet gun! (CF80-SCK)
Set holder for dies and sets with 3/16" stems; has a .401" standard shank and can also be used in rivet gun; heat-treated stainless steel (CF80-RSH)
Ram with set hole which also accepts dies and sets with 3/16" stems; heat-treated stainless steel (CF80-RAM)
Arm capped with 1/2" ID sintered bronze bushings which are reamed to fit the ram for more accurate alignment
O-ring and low tension return spring holds the ram off of the skin for positioning
Replacement O-Ring available (CF80-RNG)
Replacement Spring available (CF80-SPR)
Arm, base, and front plate (CF80-FPL) are powder coated separately to allow for adjustment and fine-tuning of arm and tooling alignment.
Additional details:
22" throat depth
Base is 1.5" x 4" x 5/16" aluminum channel (powder coated)
Arm is 1" x 2" x .120" steel tubing (powder coated)
Includes prints for building your own carpet-covered wooden table top to provide a perpendicular work surface; also available online here (C-Frame table)
|
|
|
|
|
|
Click here to purchase or contact the seller of this item on eBay