3M 30095 SR Cutter No. 8 (Pack of 5) 21mm x 25.6mm, Plastic Rotary Cutting Tool


Click here to purchase or contact the seller of this item on eBay

Current Price: 9.99 USD

3M
30095
SR Cutter No. 8
Pack of 5
21mm x 25.6mm
Plastic Rotary Cutting Tool
Removes sealants and coatings cleanly with minimal or no abrasion to underlying paints, primers or metal
Easy-to-use cutter attaches to a rotary tool to replace time-consuming hand scraping with metal scrapers that gouge the workpiece
Cleans without chemical solvents, eliminating chemical mess and waste
Metal mandrel fits a right angle power tool
No. 8 cutter is 1" in diameter and has an internal cavity designed to fit directly over rivets or other protrusions for thorough cleaning
Primarily used in the aerospace industry
The 3M™ SR Cutter is a plastic rotary cutting tool with an attached 1/4"-28 male threaded metal mandrel for use on slow speed right angle drills. Our SR Cutter works quickly and efficiently to peel off sealants or other thick coatings with minimal to no abrasion to the underlying base material, replacing tedious scraping by hand and messy chemical solvents.
Cleanly Replaces Chemical Solvents
Not only is the 3M™ SR Cutter a great alternative to hand scraping, but it works without the use of messy chemical solvents. It enables operators to remove sealants and residues immediately, without having to wait for chemicals to act or spending time and effort handling and cleaning up a hazardous mess. Your only waste is the sealant itself.
Using the 3M™ SR Cutter
 
No. 8 Cutter: For fastener heads, be sure that the inner diameter of the No. 8 SR Cutter will completely fit over the head of the fastener. Place the cutter on top of the fastener with firm pressure. Using the drill throttle, run at low speed to cut away sealant from around the fastener. Remove the sealant by "jogging" the drill in a start-stop fashion several times—this prevents unwanted frictional heat that may degrade the sealant or blunt the cutter.
3M 30095 SR Cutter No. 8 (Pack of 5) 21mm x 25.6mm, Plastic Rotary Cutting Tool 3M 30095 SR Cutter No. 8 (Pack of 5) 21mm x 25.6mm, Plastic Rotary Cutting Tool 3M 30095 SR Cutter No. 8 (Pack of 5) 21mm x 25.6mm, Plastic Rotary Cutting Tool
3M 30095 SR Cutter No. 8 (Pack of 5) 21mm x 25.6mm, Plastic Rotary Cutting Tool


Click here to purchase or contact the seller of this item on eBay