Picture is for illustrative purpose only! 

Description

The GDU 104O provides a central display and user interface for the G1000 Integrated Cockpit System. The display is mounted flush to the aircraft instrument panel. A GDU 1040 can be configured as either a Multi Function Display (MFD) or Primary Flight Display (PFD). The GDU 104X provides the following functions:

Flight Instrument Functions

• Display of attitude (pitch and roll), rate of turn, slip/skid, heading, airspeed, altitude, and vertical speed information (PFD or reversionary modes only)
• Display of engine and airframe instrumentation (MFD or reversionary modes only)
• Display of the AFCS flight director command bars and modes (PFD or reversionary modes only)

Navigation Instrument Functions

• Display of position and ground speed for use by the pilot/flight crew
• Display of stored navigation and map databases for use by the pilot/flight crew
• Control and display of the HSI, Selected Heading and Selected Course (PFD or reversionary modes only)
• Area navigation functions using the determined position/velocity and stored navigation data
• Approach navigation functions and associated databases
• Baro-altitude Vertical Navigation

System Interface Functions

• Interfacing with the GIA 63/63W Integrated Avionics Unit (IAU) and other GDU 104Xs
• Control and display of dual communications transceivers operating in the 118.00 to 136.975 MHz range in 8.33 kHz or 25 kHz frequency spacing
• Control and display of dual VOR/ILS receivers tuning from 108.00 to 117.95 MHz in 50 kHz increments
• Control and display of transponder(s) GTX 32 or 33, GFC 700 autopilot (GDU 1042, 1043, 1044, 1044B, and 1045 only), GDL 69/69A data link, GWX 68 Weather Radar, etc.