Homebuilt Jodel Spring Steel Landing Gear for 2-place aircraftClick here to purchase or contact the seller of this item on eBay |
|
|
| Current Price: 300.00 USD |
These were on a homebuilt 2 seat Jodel that came from Canada. I don't think these are based on any Jodel plans, but were made or adapted by a previous owner. They may originally have been on a production aircraft of some sort. These spring steel landing gear legs bolt around the spar with 4 long bolts that went through to a rectangular plate on top of the spar. I didn't keep the plate or long bolts due to their poor condition. They have forward extensions, similar to the retrofit extensions for Cessna 120/140s. Extensions are a little over 6" long. Axle bolt pattern on the extension fits a 6" wheel. The bolt pattern at the bottom of the gear leg doesn't fit an axle pattern without the extension. I've grouped the photos as: pair of 2 legs, right leg alone, then left leg alone. Hopefully that helps make sense of the photos. The legs weigh right at 25 lbs each. The legs are 1/2" thick and 6" from front to rear where they bolt to the spar. Any other parts, tools or anything else in the background are not included. Only the two gear legs and the gear extensions are for sale.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Click here to purchase or contact the seller of this item on eBay